SPC Front Upper 4 Camber & Caster Arms For A6, A8, Continental, Phaeton #81378

  

SPC / Specialty Products Company. Front Upper 4 Camber & Caster Arms For A6, A8, Continental, Phaeton. Warning: You will hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH).

This set of arms will transmit road noise into the cabin. Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C6 and D3 platforms. This kit has four arms so you can change camber and caster ±1.5° on both sides. XAxisT sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight. OE style, maintenance free, booted ball joints. Large 18mm threaded adjuster links. XAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint. Don't need the added benefits of our performance arms? Use SPC arms with OE type bushings - part #81373 for two sets of arms to correct both sides of the vehicle, #81371 for the left side, or part #81372 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Sealed joint retains grease and excludes contaminants. Highly polished electroless-nickel finish on ball. Up to 45° angularity for high mis-alignment requirements. Audi 2005 - 11 A6/S6 2004 - 10 A8/S8 Bentley 2004 - 12 Continental Volkswagen 2004 - 06 Phaeton. 7 hr/side Required: 1 kit per axle UPC: 082642813781 Dimensions: 3.3" X 15.5" X 7 Weight: 9 lbs.

Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.

We always look to satisfy our customers in whatever needs they may have. Any product you return must be in the same condition you received it and in the original packaging.